It is possible to obtain the efficient finishing to a shirt by combining SY-550AS and SB-100. This product is a system of good performance concurrently utilizing both a tuck press iron and high temperature wind and it ensures the stable finishing.
Introduction of a Single Sleeve(UDS-2)
UDS-2
Single Sleeve
Capable of a genuine neat tuck finishing easily in spite of occupying only about two-thirds of the space of a conventional tuck press machine.
| Model number | UDS-2 | ||
|---|---|---|---|
| Product name | Single Sleeve | ||
| Power supply | Voltage | AC200 V | |
| Phase | 3 phase | ||
| Frequency | 50/ 60 Hz (common) | ||
| Power consumption | - | ||
| Driving power | - | ||
| Vacuum | - | ||
| Heat wind | 0.3 KW | ||
| Heater | - | ||
| Steam | Standard use | 0.5 MPa | |
| Max. supply | 0.7 MPa | ||
| Consumption | 15 Kg/h | ||
| Inlet diameter | 1/2 inch | ||
| Outlet diameter | 1/2 inch | ||
| Air | Consumption | 12 L | |
| Working pressure | 0.5 MPa | ||
| Inlet diameter | 3/8 inch | ||
| Mechanical dimension | Width | 600 mm | |
| Depth | 845 mm | ||
| Height | 1457 mm | ||
| Exhaust diameter | - | ||
| Weight | 140 Kg | ||
