It is easy to set a shirt by means of a shirt clamping module, and the finishing to a tuck on the back is given neatly by using vacuum simultaneously. It is possible to use this product having the versatile-shaped lower iron as an all-round presser.
Introduction of a Body ES(SNPE-3S)
SNPE-3S
Body ES
A presser equipped with a dedicated function to give the finishing to a body section quickly and neatly.
| Model number | SNPE-3S | ||
|---|---|---|---|
| Product name | Body ES | ||
| Power supply | Voltage | AC200 V | |
| Phase | 3 phase | ||
| Frequency | 50/ 60 Hz (common) | ||
| Power consumption | - | ||
| Driving power | 0.4 KW | ||
| Vacuum | 0.15 KW | ||
| Heat wind | - | ||
| Heater | - | ||
| Steam | Standard use | 0.5 MPa | |
| Max. supply | 0.7 MPa | ||
| Consumption | 15 Kg/h | ||
| Inlet diameter | 1/2 inch | ||
| Outlet diameter | 1/2 inch | ||
| Air | Consumption | 22 L | |
| Working pressure | 0.5 MPa | ||
| Inlet diameter | - | ||
| Mechanical dimension | Width | 950 mm | |
| Depth | 1000 mm | ||
| Height | 1220 mm | ||
| Exhaust diameter | φ 80 mm (outer diameter) | ||
| Weight | 260 Kg | ||
